How Can We Help?
Home / Support Center / Knowledge Base / LED modules / Installation Guides of Absolute Series LED Linear Module
Installation Guides of Absolute Series LED Linear Module
We are working to finish our drawings for the permit. I see that your LED module has all the lighting characteristics I would love to have in my scenario, however, I don't understand how we install it.
Is there a drywall ceiling profile to add it to? If yes is there an exterior 90 degrees corner profile if I want to create frames with lights?
Unfortunately, we do not have any fixtures or channels available in our catalog which are designed to ensconce the Absolute Series LED Modules at this time, and we do sincerely apologize for any impact this might have on your installation planning.
As an alternative, you may be able to locate third-party channels from Klus Design, which appear to have many different extrusions available in different dimensions.
We have also attached a link to our installation guide for the product below as well, which includes detailed instructions for each configuration type.
I want to create a linear ceiling concept. I DONT'T WANT TO DIM those lights. I have found channels to run the module you have into them, and I have found corners as well.
Will I be able to create my lighting scenario using your module LED? If I don't want to dim them what are the problems I will face during the installation?
We can confirm that the ABSOLUTE SERIES™ LED Linear Module does not require dimming (or connected dimmers) for operation.
Each order of the ABSOLUTE SERIES™ LED Linear Module contains a board of attached modules. This board is much like a Kit-Kat bar, in that the individual modules can be detached with a small amount of force.
Each ABSOLUTE SERIES™ LED Linear Module has four holes (3.3 millimeters in diameter) that are used for mounting the product to fixtures. These mounting holes are compatible with standard M3 screws.
The modules can be connected in series by using soldering, pigtail wiring, or the WAGO board-to-board links. All of these options allow for power output from the power source to be shared across the connected LED Modules, as described within the assembly instructions.
For a simpler installation, you may alternatively be interested in the ABSOLUTE SERIES™ LED Flexible Strips. These provide identical high-quality 99 CRI output as the LED Modules while offering slightly easier installations within standard aluminum channels.
Question posted under:
LED modules
Related Knowledge Base Questions
‹ Knowledge Base Home
