SHOP BY APPLICATION    SHOP BY APPLICATION   
SHOP BY PRODUCT TYPE    SHOP BY PRODUCT TYPE   
SHOP BY COLOR    SHOP BY COLOR   
RESOURCES    RESOURCES   
REACH OUT    REACH OUT   
Your LayoutMap™ is Loading...Please Wait
The following illustration shows the wiring and component configuration used to connect a short reel (3.2 ft / 1 m) of our realUV™ LED strip lights to a standard wall-plug outlet.

This is a simple and straightforward connection that shows one of the most common wiring setups for this product. All components utilize standard DC barrel jack connectors, so no additional accessories or assembly are required. Simply plug everything in, and you'll be up in running in a matter of minutes.



← Back to all LayoutMaps™

image/svg+xml GNDWire to Ground STANDARD WALL-PLUG OUTLET AC 120/240V LINE VOLTAGE NEUTRALAC 120V/240V LINE VOLTAGE HOT/LIVEAC 120V/240V The FilmGrade power supply includes a US-style two-prong plug that will fit in any standard wall-plug outlet. For use outside of North America, a voltage transformer is not needed, but a plug adpater may be necessary. MODEL: YHY-1201000P/N:DS12120C14-WINPUT:AC100-240V~ 50-60hZ, 2.5AOUTPUT: 12V = 10.0A DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- DC 12V DC 12V DC 12V DC 12V +- +- +- +- 18 AWG | Cable Length: 4.9 in (125 mm) This power supply unit converts line voltage AC (100-240 volts) to low voltage DC output needed for LED strip operation. The unit plugs directly into any standard wall-plug outlet, and includes a male DC barrel jack connector on the DC output end.This product cannot be used with traditional wall-dimmers (e.g. Lutron / Leviton) but can be dimmed via an inline-dimmer connected on the DC output side. INPUT: AC 100-277 V + DIMMING OUTPUT: DC 12V Cable Length: 48 in (1200 mm) | NOT DRAWN TO SCALE INPUT: AC 100-240 V Cable Length: 48 in (1200 mm) | NOT DRAWN TO SCALE Standard DC Barrel Connector(5.5 x 2.1 mm) Standard NEMA 2-Prong Plug 18 AWG | Cable Length: 4.9 in (125 mm) The realUV™ LED strip light product is a low-voltage 12 volt LED strip light that is offered with either a 365 nm or 395 nm wavelength specification.The LED strip can be purchased in 3.2 ft (1 meter) or 16.4 ft (5 meter) reels, and can be cut to length in 1 inch (25 mm) intervals using a pair of scissors. realUV™ LED Strip LightsPART NUMBER 7021 FilmGrade™ DC Power Supply PART NUMBER 3091