UV LED Flood Inspection Light for Rewind Section on Slitters

I am looking for a recommendation on which flood light to order for material inspection on the rewind section of one of our slitters. The light will be used for very basic visual inspection. The material being rewound have a coating which is visible under UV light. The operator will use the light at low speed to check for uniform coating. The light or lights will illuminate the rewind section of the machine and will be pointed away from the operator towards the material. 

Our experience in this specific industrial process is a bit limited, so while we do not have any immediate recommendations.

If you have any technical data on the coating, that would help us determine the UV requirements.

Generally, however, the 365 nm would be the best wavelength for visual fluorescence UV applications. As such, this may be a good starting point for running tests if you would like to take an empirical approach.

Please see below for a direct link to the 365 nm UV LED flood light: