365nm UV LED strip for Curing a UV-activated Resin

I would like to know if your 365nm UV light strip would be recommended for curing a UV-activated resin that requires exactly 365nm to cure. Also, can any 12v source be used to power, and no LED driver required? 

Though we have not performed any internal tests regarding the use of our ultraviolet products for curing processes, several of our customers have let us know that the 365nm version has been quite useful for curing processes in the past. 

We have attached a link to the product’s irradiance pattern and photometric report below, which we hope proves to be useful in your configuration planning for determining how many segments of 365nm product your curing process might require. 

Further, we are happy to confirm that additional drivers are usually not required in order to utilize a 12V power supply with our strip light products. So long as the voltage delivered is consistent and does not exceed 12V, the LED strip light should function well without issue. 

365nm realUV™ LED Strip Light Irradiance Pattern

365nm realUV™ LED Strip Light Photometric Report

Related Knowledge Base Questions