How Can We Help?
Home / Support Center / Knowledge Base / LED strip lights / What do I need to connect the 365nm UV LED 16 ft strip to a spare battery in the trunk of the sidecar?
What do I need to connect the 365nm UV LED 16 ft strip to a spare battery in the trunk of the sidecar?
I want to mount these in the sidecar of the motorcycle. What do I need to connect this to a spare battery in the trunk of the sidecar? Can my alternator power it? I do have a 12V receptacle. The strips are DC powered, so I don’t see why I would hook it up to your AC transformer.
It is correct that the LED strips operate on DC 12 volts, so if you have an existing 12-volt battery source, such as an automobile battery, you can go ahead and skip the AC power adapter altogether.
Our LED strips come with DC barrel jacks mounted on each end. We may be incorrect, but we assume you have a 12-volt receptacle that is the size of a traditional cigarette lighter. While we don't sell any adapters, a third-party adapter such as the one below may work to connect the LED strips:
If you do intend to connect an entire 16.4 ft length, be aware that the high power draw may be an issue for battery capacity as well as the wires and components used in any third-party products.
Can you give me an idea of the amperage needed to power the whole 16 feet?
The LED strips draw approximately 0.4 amps per foot. So, for an 8 ft section, that would be approximately 3.2 amps.
Question posted under:
LED strip lightsUV-A LED strip lights
Related Knowledge Base Questions
‹ Knowledge Base Home
