How Can We Help?
Home / Support Center / Knowledge Base / LED strip lights / LED Strip Lights for Stair Lighting Installation
LED Strip Lights for Stair Lighting Installation
I have a staircase with 16 steps. Each step is 32" in length. They need to be hardwired to 120V. I want to have a timer so that they come on in the evening (7:00 pm) and off in the morning (6:00 am). Single color with blue being prefer, but white will also work. I'm having a difficult time putting this package together. Can you help by recommending the items that I would need for this project?
To start off, our SimpleColor Blue LED strip lights sound like a great option for you. These LED strip lights feature just a single color light output and should provide you with the simplest lighting installation. Below is the product link for your reference:
In terms of spanning each of the 16 staircase steps, the configuration will require a bit of careful planning due to some limitations in the "maximum run length" per LED strip light.
For the SimpleColor Blue LED strip lights, the maximum run length is 16.4 ft. If I have done the math correctly, this means that each run can cover 6 steps at a time (6 steps x 32 inches / step = 16 ft). In order to cover all 16 steps, you will require three separate runs, each powered with an independent power supply.
Depending on the distance between each of the stairs, you will likely want to use PN 3071, or a combination of PN 3070 + PN 7098.
The power supply we would recommend in this installation would be our TRIAC dimmable power supply, which is designed to be hard-wired to the wires in your wall. To control the lights on a timer, you may want to consider using a "smart home" type dimmer switch such as the third-party Lutron Caseta, which can be programmed to turn on and off at certain times during the day.
Below is a configuration diagram for our CENTRIC HOME LED strip lights, which uses the same 12 volt low voltage architecture and may be useful for better visualizing the wiring needed to complete the installation:
https://www.waveformlighting.com/layoutmaps/3001_1C
Please note that you may want to consider using PN 7095 to connect the power supply output wires to the LED strip DC input jacks:
Finally, should you prefer a plug-in approach, our FilmGrade LED power supply can also be a nice alternative that can also be programmed using a third-party electrical timer similar to those used for Christmas tree lights.
Question posted under:
LED power suppliesLED strip lightsLED dimmers
Related Knowledge Base Questions
‹ Knowledge Base Home
