How Can We Help?
Home / Support Center / Knowledge Base / LED strip lights / Installation Configuration for Kitchen Lighting
Installation Configuration for Kitchen Lighting
We are in the middle of a kitchen remodel and need advice. On our current configuration, we have a 3 ft cabinet, then an opening for the microwave, and then a 2 ft cabinet corner followed by a sink and a 2 ft cabinet. I would like a direct wire, dimmable led configuration. We want a continuous bright setup along the countertop and backsplash. With the spaces with the microwave and sink what would be a good choice for us?
Based on the details provided, we might recommend our 3000K CENTRIC HOME™ LED Strip Lights for Home & Residential product for your kitchen installation.
If you would like to install this product utilizing the wall wiring, we would recommend a matching voltage TRIAC Dimmable Power Supply for LED Strip product. When installed within a junction box or wall cavity, this product can be paired with wall switches and dimmers for light control. For mounting the LED strip light product, you might also be interested in our Aluminum Channel for LED Flex Strip product.
Using the measurements provided, it appears that your installation would require about seven feet of LED strip light product. As such, one 16.4 ft (5 meters) reel of the CENTRIC HOME™ product should provide more than enough lighting for your installation.
However, please note that our LED strip light products are not designed to come into contact with water. If your installation runs across the sink backsplash, your installation might encounter enough moisture to cause product failure or create a safety hazard. That being said, many customers have connected similar lighting segments using hidden 16 AWG wiring behind the drywall, safely away from potential hazards.
We have included some links to our layout diagrams below, which we hope prove to be useful for your planning purposes. This link provides a configuration description and includes links to each of the connector accessories. As you can see, the individual segments can be pretty easily connected to a single power supply.
LayoutMaps™ - LED Strip Light Layout 3001-1B: https://www.waveformlighting.com/layoutmaps/3001_1B?px=-2190&py=-2213.5&pw=1380&ph=1427&s=0.1
LayoutMaps™ - LED Strip Light Layout 3001-1C: https://www.waveformlighting.com/layoutmaps/3001_1C?px=-2190&py=-2213.5&pw=1380&ph=1427&s=0.1
Question posted under:
LED strip lightsLED dimmersLED DriversKitchen lighting