How Can We Help?
Home / Support Center / Knowledge Base / LED strip lights / ABSOLUTE SERIES™ LED Flexible Strip for Photographic System for Meat Product Image Analysis
ABSOLUTE SERIES™ LED Flexible Strip for Photographic System for Meat Product Image Analysis
We would like a set of lights with a more accurate representation of daylight, and ABSOLUTE SERIES™ LED Flexible Strip - 99 CRI seems the best option. We would like to mount it in a black box, so we need to standardize lumens in the whole box, without reflections, is it possible to use these LEDS flexing them in a circle of around 60 cm diameter? If not, we should go for the bulbs, in this case, which one of them would you recommend to us?
Our ABSOLUTE SERIES LED strip lights indeed sound like a great fit, as they will indeed provide you with the most accurate representation of natural daylight.
The one challenge I foresee with the product is that while it is flexible in an up/down direction, it cannot be made to curve in a left/right direction. As such, creating a circular design with the product would be quite challenging.
If you can work with a polygonal shape that approximates a circle, such as a polygon with 8 sides or more, you may want to consider using the LED strips in short, straight runs joined together using a connector such as our PN 3071.
For similar lighting quality, we would perhaps suggest our NorthLux A19 lamps, which can be found at the link below:
About the power supply, since we are in Europe, so maybe is better if we buy a European plug, or do you have this option? I understand we need a 120W 12V 10A output. So the female barrel jack and one of the strip-to-strip connection is enough to make the connection, is it right?
You can certainly utilize a European version of the 12-volt power supply. As you mention, the primary requirements are electrical (120 watts, 12V/10A) and to ensure that the output plug is compatible with the ABSOLUTE SERIES LED strip light barrel jack DC connector (included on both ends).
Our North American version can also be used in Spain but will require a plug adapter for the wall outlet which you will need to purchase from a third party locally.
As mentioned above, the ABSOLUTE SERIES LED strip light includes the DC connector pre-installed on both ends of the reel. As such, PN 7094 is likely unnecessary.
PN 3071 is the correct accessory to join the cut sections back together at any angle needed.
Question posted under:
LED strip lightsA19 Bulbs (60 watt equivalent)D50 (printing, digitizing)
Related Knowledge Base Questions
‹ Knowledge Base Home
