Lower Wattage Photon Panel Light

Can you make the 1' by 2' 4000 White Photon panel light in a 50-watt version? Does this panel light come in any other lengths?

Unfortunately, we currently offer the PhotonPanel in a single size and power configuration only.

​While this may not be practical for your particular setup, utilizing a PWM dimmer or a lower-voltage power supply may be viable options for achieving a lower wattage output using the same panel. 

Would we be able to use one dimmer for two panels?

As long as the connected panels do not exceed the power ratings of the dimmer or power supply unit, this would certainly be permissible.

​Specifically, the panels each draw 4.5 amps, so two panels daisy-chained would draw 9.0 amps. The dimmer units have a max amperage rating of 10 amps, so this would be OK, but the power supply would need to have an amperage rating of 9.0 amps or higher to ensure that the total system load is below its capacity (power supply would need be from a third-party, as our power supplies have a max capacity of 5.0 amps).

Do note that the DC input jacks do not allow for daisy-chain input (since the DC jacks are only rated up to 5.0 amps), so the power input (and the dimmer circuit) must be fed through the WAGO terminal blocks. 

Question posted under:

LED modulesLED dimmers

Related Knowledge Base Questions

‹   Knowledge Base Home