LED Strip Lighting for Floating Shelves

I want to use strip lighting on 4 individual shelves, 2x2ft, and 2x3ft. Two shelves are mounted on either side of the TV. I want to use the existing wall switch for on/off and feed power from the attic down as I’m on the slab. Ideally, I would like to have voltage conversion in the attic and feed 12v/24v wiring out a hidden hole behind each shelf to led strips. Can you provide suggestions and equipment list? 

Based on the details provided, it appears that your installation can be accomplished using one unit of the 16.4 ft reel of LED strip lighting product divided into the 2 and 3 ft segments, as well as one unit of the TRIAC dimmable power supply in order to connect the LED strip lights to the wall switch and wall wiring. 

​It might also be helpful to note that our LED strip light products are available in both 12V and 24V. As such, it will be important to select the appropriate power supply voltage option.

​You may also find value in the below wiring products, which can be utilized for connecting the power supply to the LED strip lights, as well as connecting the LED strip segments together. 

​16 AWG Wire for LED Strip Lights - 33 ft / 10 meters: https://store.waveformlighting.com/products/16-awg-wire

LED Strip to Wire: https://store.waveformlighting.com/products/led-strip-to-wire-solderless-connector-for-single-color-led-strip-10-pack-1

LED Strip to Strip: https://store.waveformlighting.com/products/led-strip-to-connector-solderless-connector-for-single-color-led-strip-10-pack

I have also attached a link to a layout map below which illustrates the configuration closest to the description provided. ​

LayoutMaps™ - LED Strip Light Layout 3001-1B: https://www.waveformlighting.com/layoutmaps/3001_1B?px=-2255.5&py=-2110.5&pw=1511&ph=1221&s=0.1

Question posted under:

LED power suppliesLED strip lightsLED dimmersLED Drivers

Related Knowledge Base Questions

‹   Knowledge Base Home