Compatible Dimmer & Power Supply for 24V LED Strip Lights

I am putting an order together for two of your 5m 24v 4000k 95 CRI LED light strips and need your help choosing a MeanWell 24V 150W Power Supply to drive an 18.5-foot segment. I am considering the MeanWell ELG-150-24AB and Lutron Caseta Wireless ELV. Will this work with these strips? Is there a better 150W power supply?

We've reviewed the product literature for the Meanwell product model numbers supplied, and all of them appear to be compatible with an 18-ft installation of our CENTRIC DAYLIGHT 24-volt 4000K LED strip lights. The primary electrical requirements for this installation would be 24 volts DC constant voltage output and a power capacity of at least 120 watts (5.5 watts x 18 ft = 99 watts, 20% overhead added).

​All three of the Meanwell products you mentioned appear to have the ability to provide this output, so they should be compatible; for further differences and recommendations between those options, we would recommend reaching out to Meanwell to better determine the best fit.

We did notice that you're looking to use a Lutron Caseta dimmer, which uses a phase-cut dimming signal. From what we understand, Meanwell products are NOT compatible with phase-cut dimmers and therefore may present some compatibility issues, so we would recommend reviewing this as well.

Question posted under:

LED power suppliesLED strip lightsLED dimmersLED Drivers

Related Knowledge Base Questions

‹   Knowledge Base Home